(225) 788-2211

LA License No. 62636 - Mechanical, Electrical, Building Construction

Air Conditioning Installation, Service and Repair in East Baton Rouge, Ascension and Livingston Parishes

The entire process of making the air in your property a comfortable temperature is based on a very simple scientific principle, and the rest is achieved by mechanical means. Let’s take a look at how air conditioning works to cool your home.

The Process of Cooling Your Home with AC


Your air conditioning unit uses chemicals that convert from gas to liquid and back again quickly. These chemicals transfer the heat from the air inside your property to the outside air.

The AC unit has three key parts. These are the compressor, the condenser, and the evaporator. Your unit’s compressor and condenser are typically located in the outside part of the air conditioning system. Inside the house is where you will find the evaporator.

The cooling fluid reaches the compressor as a low-pressure gas. The compressor squeezes this gas/fluid, and the molecules in the liquid are packed closer together. The closer the compressor forces these molecules together, the higher the temperature and energy rise.

How Your Air Conditioner Removes Hot Air & Blows Cold Air


This is how an air conditioner works to cool your home:

This working fluid exits the compressor as a high-pressure, hot gas, and it moves to the condenser. The outside unit of an air conditioning system has metal fins all around the housing. These fins work like the radiator on a vehicle, and they help dissipate heat more quickly.

When the fluid leaves the condenser, it is much cooler. It’s also changed from a gas to liquid because of the high pressure. The fluid makes its way into the evaporator through a minuscule, narrow hole and when the liquid reaches the other side of this passage, its pressure drops. When this happens, the fluid begins to evaporate to gas.

As this occurs, the heat is extracted from the surrounding air. This heat is required to separate the molecules of the liquid into a gas. The metal fins on the evaporator also help exchange thermal energy with the surrounding air.

When the refrigerant leaves the evaporator, it is once again a low-pressure, chilled gas. The process starts all over when it goes back to the compressor. There is a fan that’s connected to the evaporator, and it circulates air around the inside of the property and across the fins of the evaporator.

The air conditioner sucks air into the ducts through a vent. This air is used to cool gas in the evaporator, and as the heat is removed from the air, it’s cooled. Ducts then blow air back into the house.

This process continues until the inside air of your home or business reaches the desired temperature. When the thermostat senses that the interior temperature is at the desired level, it shuts the air conditioner off. When the room heats up again, the thermostat turns the air conditioner back on until the preferred ambient temperature is achieved again.

Walker, Louisiana  70785

LA Registration No. 557354 - Home Improvement

MISSION STATEMENT:   Satisfy clients' residential and commercial HVAC needs with their budget, safety and comfort in mind, utilizing energy efficient equipment, honesty, professional conduct, and industry enforced codes.

Team  Poteete  Mechanical  LLC

State Plumbing Board of LA License No. LMNGF10349

WHEN  YOU  JUST  CAN'T 

TAKE  THE  HEAT,  CALL  TEAM  POTEETE!

27830 Old SouthWalker Road